Red Hat 8.0 quote problem

[pwlcek]

I've installed Red Hat 8.0 with the option "Server setup" from scratch and kept all options to default. Everything was fine.

Then I downloaded the DSM installer script and started it. Everything seemed to be OK unless you restart the computer.

Suddenly a lot of errors occur. These are the errors I get:

---8<---Dec 22 12:24:52 dax kernel: PIIX4: IDE controller on PCI bus 00 dev f9
Dec 22 12:24:52 dax kernel: PIIX4: chipset revision 18
Dec 22 12:24:52 dax kernel: PIIX4: not 100%% native mode: will probe irqs later
Dec 22 12:24:52 dax kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Dec 22 12:24:53 dax kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Dec 22 12:24:53 dax kernel: hda: MAXTOR 6L080J4, ATA DISK drive
Dec 22 12:24:53 dax kernel: hdc: HL-DT-ST CD-RW GCE-8080N, ATAPI CD/DVD-ROM drive
Dec 22 12:24:53 dax kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 22 12:24:53 dax kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 22 12:24:53 dax mount: mount: wrong fs type, bad option, bad superblock on none,
Dec 22 12:24:53 dax kernel: blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
Dec 22 12:24:53 dax mount: or too many mounted file systems
Dec 22 12:24:53 dax kernel: blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
Dec 22 12:24:53 dax kernel: hda: 156301488 sectors (80026 MB) w/1819KiB Cache, CHS=9729/255/63, UDMA(100)

---8<---

Partition check:
Dec 22 12:24:53 dax kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
Dec 22 12:24:53 dax netfs: Mounting other filesystems: failed

---8<---

Dec 22 12:24:54 dax kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 22 12:24:54 dax kernel: tmpfs: No value for mount option 'usrquota'

---8<---

Dec 22 12:24:54 dax kernel: tmpfs: No value for mount option 'usrquota'

---8<---

Dec 22 12:24:31 dax fsck: /var: clean, 529/130560 files, 15766/261048 blocks
Dec 22 12:24:31 dax rc.sysinit: Checking filesystems succeeded
Dec 22 12:24:31 dax mount: mount: wrong fs type, bad option, bad superblock on none,
Dec 22 12:24:31 dax mount: or too many mounted file systems
Dec 22 12:24:56 dax pop-before-smtp: pop-before-smtp startup succeeded
Dec 22 12:24:32 dax rc.sysinit: Mounting local filesystems: failed
Dec 22 12:24:56 dax dsm: Cannot open configuration file. (/etc/dsm.conf)
Dec 22 12:24:32 dax rc.sysinit: Enabling local filesystem quotas: succeeded

---8<---

Dec 22 12:24:56 dax dsm: Cannot open configuration file. (/etc/dsm.conf)

---8<---

Dec 22 12:24:57 dax xinetd[919]: pmap_set failed. service=sgi_fam program=391002 version=2
Dec 22 12:24:58 dax xinetd[919]: xinetd Version 2.3.7 started with libwrap options compiled in.
Dec 22 12:24:58 dax xinetd[919]: Started working: 0 available services
Dec 22 12:25:00 dax xinetd: xinetd startup succeeded

---8<---

Any idea that may help avoiding these errors?

Peter

PS: Unfortunatly I cannot test DSM right now as my license has expired or is invalid since today - and I have now idea why.

PPS: If you need the complete log file, tell me.

[defunctiam]

This is in the faq.
http://discuss.zervex.com/showthread.php?s=&threadid=30
Did you email them?
What did they say about your license?

Mark

[pwlcek]

I have no answer to my license problem yet. However, the errors listed above are not errors due to an invalid license they occured yesterday as the license still was accepted, too.

Peter

[Staff]

At a quick glance at those errors, I do not see any errors that would stop the dsm, or your server from functioning properly.